cross-roller bearing PSX-08, with cross-section 8x8 mm and split inner and outer ring, made of stainless steel 1.3541 (AISI 420 C)
rollers are guided in our polyamid P12 cage which lowers friction and noise and allows smooth spinnig. The synthetic cage shape, assembled on the bearing, keeps most dust out of the bearing and performs like a seal.
If bearing is assembled on shaft and housing within h7 / H7 tolerance range, stiffness can be improved considerably and allows to transmit higher axial loads and torque.
The bearing bore sizes are available between 80 and 500 mm, however larger sizes are possible and depends on request. Don`t hesitate to ask.